EM519033 is a modern energy meter for DIN rail and determines the active and reactive power as well as electrical measured values (U/I/P). The device is for measuring consumption in NSHV and distributions for ISO 50001. It can also be used to unterverrechnung after mid. Via the interfaces, it can be used for cost center accounting control systems and in energy management system can be integrated into the system.It supports IR and RS485 Communication for real-time monitoring. It measures active and reactive energy, forward and reverse energy. 3 measurement modes can be set according to the synthesis code. This AMI electricity meter has two display modes: automatic display and button-pressing display. It complies with international standard EN50470-1/3.
Device for making indications in kWh with the possibility of remote reading registers of indicators, via a wired network of RS-485 standard. A special electronic circuit, by the flow of current and applied voltage generates pulses in proportion to the energy consumed. Phase energy consumption is signaled by a flashing LED. The number of pulses is converted into energy input and its value is indicated on the LCD display (6 + 2) with MID Certificate.
1.Brief introduction
EM519033 is a modern energy meter for DIN top hat rail and determines the active and reactive power as well as electrical measured values (U/I/P). The device is for measuring consumption in NSHV and distributions for ISO 50001. It can also be used to unterverrechnung after mid. Via the interfaces, it can be used for cost center accounting control systems and in energy management system can be integrated into the system.It supports IR and RS485 Communication for real-time monitoring. It measures active and reactive energy, forward and reverse energy. 3 measurement modes can be set according to the synthesis code. This AMI electricity meter has two display modes: automatic display and button-pressing display. It complies with international standard EN50470-1/3.
Device for making indications in kWh with the possibility of remote reading registers of indicators, via a wired network of RS-485 standard. A special electronic circuit, by the flow of current and applied voltage generates pulses in proportion to the energy consumed. Phase energy consumption is signaled by a flashing LED. The number of pulses is converted into energy input and its value is indicated on the LCD display (6 + 2) with MID Certificate.
The EM519033 MID is ideal for billing the feed-in tariff for solar systems, photovoltaic systems and PV systems. It fulfills all requirements due to its MID calibration and backstop for an approved, error-free operation. Ideal also for checking the consumed kWh or kvarh in machinery, factories, plants, power sections, ....The device has an S0 interface, an RS485 Modbus and an IR infrared interface.The kWh / kvarh multimeter has been designed in accordance with CE-EN61036 and complies with CE requirements as well as EN61010 and EN61326. It belongs to the highest accuracy class 1. With its 6 digital digits and two decimals all selectable values are quickly readable.
2.Function description
(1)Measurement of active and reactive energy, forward and reverse energy, voltage and current
(2) 3 measurement modes can be set according to the synthesis code
(3)Infrared Communication IEC1107 Protocol; RS485 Communication Modbus Protocol
(4)Two display modes: automatic display and button pressing display
(5)High accuracy: active-1.0, reactive-2.0
(6)Support max demand, 4 types of impulse output
3. Specifications
Type | 3 Phases Meter |
Reference Voltage | 3*230/400V |
Current | 0.25-5(30)A, 5(32)A,5(40)A,5(45)A, 5(50)A, 5(80)A |
Accuracy Class | Class B |
Standard | EN50470-1/3 |
Frequency | 50Hz |
Impulse Constant | 1000imp/kWh,1000imp/kVarh |
Display | LCD6+2 |
Power Consumption | ≤ 2W, <10VA |
Starting Current | 0.004Ib |
Temp. Range | -20~+70℃ |
Average Temp. | 85℃ |
Relative Humidity | 90% |
Communication | IR&RS485 Communication |
4. Application
Totalization of the electric energy in the industry for every single line or machine in the factory area
Measurement of energy generated by renewable sources such as solar, eolic, etc.
Suits for Mode 2/3/4/Inductive EV Charging
Accounting and billing of consumptions in camp sites, malls, residential areas, naval ports, etc.
Totalization of the electric consumption in hotels, congress centers, and exhibition fairs.
Accounting of the consumptions in buildings with executive office services.
Internal allocation of the consumptions in timeshare civilian and industrial buildings.
Realization of energy monitoring systems.
Remote survey of the consumptions and compute of the costs
Function Description
